The Oz Report, a near-daily, world wide hang gliding news ezine, with reports on competitions, pilot rankings, political issues, fly-ins, the latest technology, ultralight sailplanes, reader feedback and anything else from within the global HG community worthy of coverage. Hang gliding, paragliding, hang gliders, paragliders, aerotowing, hang glide, paraglide, platform towing, competitions, fly-ins. Hang gliding and paragliding news from around the world, by Davis Straub.

logo
The
 Oz Report
email
?
older newer

A return to the primary materials

A modern day bamboo glider
March 31, 2015, 8:18:21 EDT

John Bilsky|Quest Air

John Bilsky «udaleaf» writes:

It's a Bamboo FALCON.

Since the summer of last year I have been testing the flight characteristics of my new-ish glider all over the U.S. During this time more than a few dozen pilots have seen it and made it a point to ask me questions, express their concerns, wish me luck and in general show their curiosity. This outpouring of communication has taken place in five flying sites outside the general area I normally fly. These out of state sites include: Yosemite, Fort Funston, King Mountain, Villa Grove and finally Quest Air. Normally I fly PA & NY foot launch sites including the Elmira sites, Ellenville and my favourite, the Hyner Club launches.

So, to all who have taken some time to talk with me, and especially those who have seen my glider but only gawked, I'd like to clear up a few misconceptions.

For starters, local Elmira pilots Ed J. & Ron K., Hyner pilots Shawn, Bob, TR, Jesse, Jim and everyone else who has referred to my wing as a "Bamboo Bomber"…it's NOT. It's a Bamboo Falcon, Okay? A FALCON. It has a Falcon 3 sail and standard WW Falcon 195 aluminum battens. To replicate the proper curves of the battens with bamboo would have been highly problematic and not worth the effort. However, all the visible bamboo features on the glider are as close to standard Wills Wing dimensions, especially the lengths, as possible. The glider is, for all practical intents and purposes, a Wills Wing Falcon…a Bamboo Falcon.

Now, a few questions and comments from pilots need to be addressed.

The first and most common question I've been getting is "Is that REAL?" Yes of course it's real. It's certainly not imaginary and it took a lot of time and effort to produce it. Do you have any inkling how to grow straight bamboo? You can't. But if you ask any old timer how to produce a perfectly straight bamboo cane fishing pole, he will tell you that one must take the bamboo and hang it from the tip and let gravity do the rest while the bamboo "cures". I reasoned that a weight attached to the distal end would enhance the process nicely. A very high climate controlled rafter is essential. Judicious sandpaper usage completes the process.

"But what about the faired king post? That's gotta be fake."

Really now?

Bamboo, being a grass and one of the fastest growing plants on earth, will easily conform it's shape to any constriction. Have you ever seen a walking stick that spirals around from bottom to top? That wood grew into that shape because a vine wrapped itself around the young tree and constricted the growth. What do you think would happen if the "constriction" was a man-made clamshell shaped form? Imagination works wonders.

"Is that thing safe to fly?" Is another query I've heard. LMAO. The strength of bamboo is legendary. Who hasn't seen pictures of tall scaffolding constructed out of bamboo? It is excellent in both compression as well as tension and shear. I won't bore the reader with engineering stats. However, it will split at the ends if not reinforced. On my glider, all the wire and tubing attachment points utilize aluminum inserts and standard fittings. The key word here is "fittings". In order to make it work either the fitting has to be made to fit the opening, or the opening has to be made to fit the fitting. Pretty simple once you think about it.

"How come you don't have a bamboo control bar?" Again like the battens, it was too problematic. I wanted to substitute laminated wood but was concerned about the strength and I wasn't about to substitute a straight bamboo control bar. Too uncomfortable. In the end I chose to have it painted to resemble laminated wood. I felt like if I had it air brushed to simply look like bamboo, it might not match well enough. I probably should have left it alone.

So how well does this thing fly? Well, my impression is highly favourable. The sail has been slightly modified with a special treatment but I won't get into that. It tows like it's on rails if conditions are smooth. It seems to have a better glide and is slightly more snappy in response than the original glider it was spawned from. It seems to have a little slower stall speed and both foot launching and landing are a breeze. So far it has not attracted any Pandas.

Many people have helped me with the building of this wing and I would like to thank them all by name. That's not gonna happen here. However I will make two exceptions. My Dad, John Sr. Who left the planet in 2007, taught me the art of woodworking. He was one of the best. And my beautiful friend Jane Lenard of http://flyingcolorspaint.com. She talked me into being safe with the control bar. Jane was a continuous inspiration and her imaginative encouragement turned what started as a whimsical and shoddy experiment with one downtube into what some might consider a true work of art.


  ‹@
contact email list
Flytec
Wills Wing
Social Responsibility
Learn to Fly
Last Seven Issues
Back Issues
Goodies
Store
Cloudsuck
Support Us
Subscribe
Classified ads
Advertise
Forum
Calendar
Site Guide
Resources
Web Services
Facebook Page
Facebook Group
Facebook Community
Facebook Events
Blog
Google Earth
Coverage
Other blogs
Other forums
Mainstream news
Memorials
RSS & OPML
privacy policy
play Pilotle (mobile)
web proxy

How to subscribe to (support) the Oz Report



You can send $20 or more for a yearly subscription / donation. To pay for your subscription with your credit card or PayPal account:



If you'd rather just send a check for $20 or more, please feel free to do so. The mail gets forwarded to me wherever I'm at.

Payable to:

Davis Straub
PMB 1889 PO Box 2430
Pensacola, FL 32513

Thanks for your support by subscribing to the Oz Report.

Oz Report Hang Gliding Discussion group

Want to discuss hang gliding? You can join the Oz Report hang gliding forum. Click Oz Report Hang Gliding Discussion Group.

Subscribing and Unsubscribing to the e-mail version

You are in charge of your e-mail subscription to the Oz Report. If you wish to unsubscribe or subscribe, click: Subscribe.

Credits

Gerry makes the Oz Report portal much smarter. He is a web consultant and a PHP expert. He's the brains behind the Oz Report, so contact him for PHP programming services. David Glover heads up the Oz Report Radio

To view the Oz Report on the web click Oz Report.

If you want to send in an article to be published in the Oz Report, send it to me here.

Davis Straub
Oz Report